Toilet Bowl UV Lamp Ozone Waterproof 2 Modes Rechargeable Multi Purpose Sensor Toilet UV LED Cleaner
$17.79
- Description
- Additional information
Description
Toilet Bowl UV Lamp Ozone Waterproof 2 Modes Rechargeable Multi Purpose Sensor Toilet UV LED
Feature:
1. BUILT IN PROTECTION SWITCH: UV lamp sensing the lid open a certain angle after the UV will automatically stop working, will not hurt the eyes.
2. EASY TO INSTALL: Tear off the backing and stick the UV LED on the toilet or garbage can lid and you can use it, you can also remove the UV LED to charge.
3. UV OZONE: UV ultraviolet and ozone double cleaning, each cleaning only takes 3 minutes, eliminating harmful substances from the source and defending your health.
4. 5000mAh BATTERY: Built in 5000 mAh polymer battery, longer life, each time can be used for three minutes, can be used multiple times, a charge can be used 200 times.
5. WATERPROOF DESIGN: The whole machine is designed to be waterproof, equipped with a wrap around silicone ring, effectively waterproof and moisture proof.
Specification:
Item Type: Toilet Bowl UV Lamp
Material: ABS
Product Size:
Length: Approx. 15cm / 5.9in
Width: Approx. 6.7cm / 2.6in
Height: Approx. 3.5cm / 1.4in (manual measurement, there will be 0-1cm error)
Lamp Wave Length: 253.7nm
Power: 1.5w
Ozone Concentration: >0.01ppm,<0.05ppm
Battery Type: Polymer battery (shipped with built in battery)
Battery Capacity: 5000mAh
Power On:
A Mode: Touch the power switch for 2 seconds, the buzzer will beep to open. On state closed toilet cover, the buzzer sounded a beep. The lamp lights up to work, work for 3 minutes after the second beep automatically into standby mode (work again, just open the closed toilet cover again)
B Mode: Tap the power switch 2 times continuously with your finger, the buzzer will sound two beeps to open. Close the toilet cover under the power on state, the buzzer issued a “drop” sound. Lamp LED up work, work for 3 minutes after two beeps automatically into standby mode, in standby mode 8 hours after the device will automatically enter the work state, 8 hours timing cycle (again work only to open again closed toilet cover)
Installation Steps:
1. Tear off the backing of the fixed bracket.
2. Put the fixed bracket in the correct direction on the inside of the toilet or garbage can cover.
3. Insert the main unit into the fixed bracket.
Steps to use:
1. Press the power switch button on the device to start working.
2. Automatic timer: open that is the time to start, a beep that is closed.
3. Press the power switch button, the speaker emits a tone device off.
Package List:
1 x UV Lamp
1 x Charging Cord
1 x Instruction Manual
Note:
Please allow ±0‑1cm error due to manual measurement. Thanks for your understanding.
Additional information
Model Number | Toilet Bowl Clean LED |
---|---|
Brand Name | TMISHION |
Origin | Mainland China |
Material | ABS |
Length | Approx. 15cm / 5.9in |
Width | Approx. 6.7cm / 2.6in |
Height | Approx. 3.5cm / 1.4in |
Lamp Wave Length | 253.7nm |
Power | 1.5w |
Feature 1 | Built in Protection Switch |
Feature 2 | Waterproof Design |