PCIe5.0 Graphics Card ATX3.0 12VHPWR 12+4 16Pin 450W Power Supply Cable Adapter Male to Female 180 Degree Turn Connectors for RTX 4090 4080 4070 Ti 3090 Ti Graphics Card
Features:
1. High quality material and workmanship: ABS rubber shell, PCB board, four layer board design, all copper tin plated, good conductivity, high fire rating, anti-aging, easy to plug and unplug, thickened and thick copper foil, ensuring stable high-power graphics card operation, beautiful appearance, equipped with shell protection, different from other similar products only bare board or EVA pad.
2. Output up to 450W: This adapter supports RTX4090 with a maximum output of 450W, with a 6oz copper plating and four layer board design, effective heat dissipation, and stable current transmission. Long term use of power output exceeding 450W may cause equipment damage. Pay attention to maintaining a good ventilation environment inside the chassis
3. 180 ° turn design: Connect the power cord and GPU interface, without causing pressure on the GPU graphics card interface, and ensure long-term stable use. This design will reduce the pressure on connectors and cables, making them safer during assembly and long-term use, effectively avoiding the difficulty of cable arrangement caused by the graphics card bracket, and beautifying the power wiring of the graphics card
4. Special reminder: Please ensure that the adapter is fully inserted into the GPU and there should be no gaps. The board is involved in overheating protection, and it is not recommended to use graphics cards with overclocking power consumption higher than 450W; Please ensure that the power cord connector is fully inserted into the adapter (bending from 35mm of the connector) to avoid the connector not being fully inserted due to excessive bending angle of the power cord. This can cause uneven current load on the terminals and damage due to heat accumulation during full load operation of the GPU
5. Strong compatibility: This 12VHPWR 450W 12+4PIN PCI-E 5.0 steering head is designed specifically for RTX 4090 4080 4070 Ti 3090 Ti graphics cards. Please note that the graphics card brands applicable to the adapters in different directions may be different!

Specification:
Certification: CE
Origin: Mainland China
Type: GPU Extension Cable
Model Number: Turn Connectors
Material: plastic+PCB+tinned copper
Color: black, white (optional)
Direction: Forward STD, Reverse RVS (optional)
Interface: 16Pin (12+4PIN) male and female connectors
Power: 450W
Size: 37 * 28 * 26mm/1.46*1.1*1.02inch
Weight: 10g

Compatibility:
Forward STD:
Applicable models: ROG-STRIX-RTX4090, TUF RTX 4090 Gaming
Unsuitable models: Nvidia GeForce RTX 4090, GeForce RTX 4090 Wind force, GeForce RTX 4090 Gaming, Aurus GeForce RTX 4090, Xtreme Waterforce

Reverse RVS:
Applicable models: Nvidia GeForce RTX 4090, GeForce RTX 4090 Gaming, Aurus GeForce RTX 4090, Xtreme Waterforce
Unsuitable models: ROG-STRIX-RTX4090, TUF RTX 4090 Gaming, GeForce RTX 4090 Wind force

Selection instructions:
Step 1: Confirm the number of pins on the graphics card power interface
Step 2: Confirm the orientation of the interface
Attention: Please pay attention to the direction of the GPU connector before purchasing (forward or reverse)
Kind reminder: This connector is 16Pin (12+4PIN)

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

1 x Power Connector