Description

Micro-Nano Bubble Generator Water Treatment Machinery Micro Bubble Generator Ozone Generator Water Pump Gas Liquid Mixing Pump

Capacity (Q)	0.5m/h to 18m/h
Head (H)	10m to 70m
Flow Rate	1T/h, 2T/h, 6T/h, 12T/h, 25T/h, 55T/h (under 40m head)
Voltage	110 / 220 / 380 V
Motor Phase	Single-phase / three-phase
Power (P)	0. 55kW to 7.5kW
Frequency	50/60 Hz
Liquid Temperature (T)	-15°C to +140℃
Maximum Ambient Temperature	+40℃
Gas-Liquid Ratio	about 1:9 (inspiratory volume is 8-10%)
Speed	2900 rpm
Standard Material	Stainless Steel 304
Type	Self Priming Pump
Name	Gas-Liquid Mixing Micro Bubble Generator
Series	Fish Pond Water Plant Breeding Aeration Pump
Usage	Ozone Generator Mixing Pump
Feature	Oxygen Pump
Applicable Industries	Farms, Retail, Environmental Protection, Aquaculture

Gas-liquid Mixing Pump
Power	Voltage	Head(m)	Flow rate(L/H)	Thread size of inlet	Thread size of outlet
250W	220V	40	200	3/8″	3/8″
550W	220V/380V	40	1000	1″	1″
750W	220V/380V	40	1000	1″	1″
1100W	380V	40	3000	1″	1″
1500W	220V/380V	40	3000	1″	1″
2200W	380V	40	4000	1″	1″
3000W	220V/380V	40	6000	1-1/2″	1-1/2″

Nano Bubble Generator
Power	Voltage	Head(m)	Nano bubble water flow rate(L/H)	Thread size of inlet	Thread size of outlet
250W	220V	40	150	3/8″	3/8″
550W	220V/380V	40	250	1″	1″
750W	220V/380V	40	500	1″	1″
1100W	380V	40	1000	1″	1″
1500W	220V/380V	40	2000	1″	1″
3000W	220V/380V	40	4000	1-1/2″	1-1/2″

The gas-liquid mixing pump is a horizontally installed self-priming gas-liquid mixing pump series product. The pump body is a direct-connected motor structure. The structure and performance of the pump can match the pumps in the United States, Europe and Japan. The pump uses stainless steel castings.

The suction port of the gas-liquid mixing pump can use negative pressure to suck in gas, so there is no need to use air compressors and atmospheric ejectors.

The high-speed rotating pump impeller mixes and stirs liquid and gas, so no stirrer and mixer are needed.

Due to the pressurized mixing in the pump, the gas and liquid are fully dissolved, and the dissolution efficiency can reach more than 80%. Therefore, it is possible to prepare highly dissolved liquid without a large pressurized gas tank or expensive reaction tower. A gas-liquid mixing pump can carry out gas-liquid suction, mixing, dissolution and directly deliver the highly dissolved liquid to the point of use.

Therefore, the use of a gas-liquid mixing pump can improve the efficiency of the production of dissolved gas and liquid, simplify the production device, save space, greatly reduce the initial investment, and save operating costs and maintenance costs.

1. Inhale while sucking water, pressurize and mix in the pump, and the fine bubbles are 20-30 microns.
2. High gas-liquid dissolving efficiency, stable performance, easy operation and easy maintenance.
3. The air flotation device can replace pressurized pumps, air compressors, high-pressure dissolved air tanks, gas-water mixers and release heads, etc., to overcome the problems of unstable operation of traditional devices and large bubbles toppling.
4. The ozone water production device can replace booster pumps, large-scale oxidation towers, etc., with a gas-liquid dissolution efficiency of more than 90%, which is 2-4 times higher than that of a Wen-type mixer, greatly reducing equipment investment and operating costs.

1. Thin, clean, low-viscosity liquid;
2. Liquid temperature: -15℃ to +140℃;
3. The highest ambient temperature: +40℃;
4. The gas-liquid ratio is about 1:9 (inspiratory volume is 8-10%);

5. The horizontal direction is the suction port, and the vertical direction is the discharge port.

1. Dissolved air flotation treatment equipment (various types of air flotation devices).
2. Ozone water production equipment (sterilization and preservation of pure drinking water, deodorization and decolorization of sewage to reduce COD, BOD, etc.).
3. Oxygen-enriched water production equipment (oxygen-enriched drinking water, intensive fish and turtle breeding, hydroponic cultivation, etc.), and can also be used for the production of other gas-liquid mixed functional water such as nitrogen.
4. Biochemical aeration equipment (domestic sewage, various industrial wastewater).

1. Install the water pipe and power cord for the machine according to the picture below, and fill the machine with water before use.

Remove the water inlet valve, lift up the water inlet hose, fill it with water, and after the water outlet valve comes out, put it back in the water inlet valve and tighten it by hand.

2. Turn off the gas flow meter, turn on the power, and wait for the machine to pump water normally (the sound becomes louder), then slowly turn on the gas flow meter and adjust it to the specified position. Pumping water within about 30 seconds will produce nanobubbles (the sound becomes smaller).

FAQ

1. How fast can I get the quotation?

We usually quote with 1 hours after we get your inquiry.If you ‘re urgent to get the price,please call us on ALIBABA/Whats’app/Skype/Wechat.

2. How can I get a sample to check quality?

1)Contact us and we’ll negotiate the best price possible for you.

2)Free sample:Sample cost can be refundable if your following order quantity is large enough.

3. Other payment methods?

1)To pay offline,You pay by T/T, Western Union and Paypal.We ‘ll send you our account information.

2)We’ll handle your order within 24 hours upon receiving cleared payment.

4. How fast can I get my package?

1)DHL :Southeast Asia 3-4 days / others 3-5 days

2)FedEx: Southeast Asia 3-4 days / others 4-6 days

3)UPS: Southeast Asia 3-4 days / others 4-6 days

4)TNT: Southeast Asia 3-4 days / others 4-6 days

Additional information

Model Number	20QY ~ 50QY
Metal Type	Stainless Steel
Material	Metal
Garden Hose Reel Type	Water Hose
Origin	Mainland China
Type	Garden Hose Reels
Product Name	Gas Liquid Mixing Micro Nano Bubble Generator
Theory	Mixed Flow Pump
Capacity	1-12 m3/h
Head	10 m to 70 m
Power	0.55 kW to 7.5 kW
Voltage	110 / 220 / 380 V
Frequency	50 / 60 Hz
Speed	2900 rpm
Liquid Temperature	-15 ℃ to 105 ℃
Maximum Ambient Temperature	+40℃
Gas-Liquid Ratio	about 1:9 (inspiratory volume is 8-10%)
Application 1	Freshwater Fish Shrimp Culture
Application 2	Farm Aquaculture Pool
Application 3	Pond Water Purification Sewage Treatment
Application 4	Micro Nano Bubbles Pump
Application 5	Milk Baths Hydrotherapy SPA
Application 6	Air Flotation Treatment Pump
Application 7	Ozone Water Treatment Pump